TL;DR
Get home appliances delivered free — and shop member deals
- Fast, free delivery on millions of items
- Access to Prime Big Deal Days deals on October 6–7
- Prime Video, Amazon Music and more included
Home Assistant 2026.10 beta adds separate audible and visual alarm settings for supported Matter leak sensors, a one-touch locking option for compatible locks, and frequency and power-factor readings for devices that expose them. The release also updates the Map dashboard and makes multi-trigger automations easier to edit; the stable release is expected Oct. 7, 2026.
Home Assistant 2026.10 is in beta with new controls for supported Matter leak sensors and smart locks, along with additional electrical measurements for compatible devices. The release also revises the Map dashboard and simplifies editing automations with multiple triggers; its stable version is expected Wednesday, Oct. 7, 2026, according to the release report.
Supported Matter leak sensors gain separate switches for audible and visual alarms. The report identifies IKEA KLIPPBOK and Shelly Flood as compatible examples. The switches configure how a sensor’s alarm behaves; they are not controls for sounding an alarm on demand. Each setting operates independently, so changing one does not change the other.
Compatible Matter locks gain a setting that determines whether a single keypad touch locks the door. Devices that provide the relevant electrical data can now expose frequency and power factor in Home Assistant. The update also adds travel-time and slat-rotation settings for WAGO Home Blind Control models 2757-1105 (Wi-Fi) and 2757-1106 (Thread). The reported changes allow the devices’ reference timings to appear in Home Assistant and can reflect updated timings after a full run between end positions.
Other changes include an updated Map dashboard, which presents People, Devices and Zones alongside the map on desktop and in a pull-up sheet on phones. The automation editor now lets users select triggers directly in a “Triggered by” condition rather than manually finding and assigning trigger IDs. The beta also includes changes to Matter commissioning and device information, plus safeguards for out-of-spec values reported by devices.
More Matter Settings in Home Assistant
The new controls make settings already supported by certain Matter devices accessible from Home Assistant, rather than limiting the integration to its previously exposed options. For households using compatible leak sensors, separating alarm settings provides a way to adjust sound and visual alerts independently. The lock option gives users a setting for whether a keypad responds to a single touch by locking.
The changes are limited by device support: the report says the options appear for devices that expose the relevant features, not every Matter sensor, lock or electrical device. The automation editor update may also reduce the manual steps needed to keep several trigger paths together. For example, a user could organize leak and all-clear notifications in one automation, though the behavior still depends on how that automation is configured.
Matter leak sensor with audible and visual alarms
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
The 2026.9 Map Foundation
The Map dashboard redesign follows the Map tiles integration introduced in Home Assistant 2026.9. According to the report, Home Assistant retrieves OpenStreetMap Foundation tiles and caches recently used tiles. That can help the map remain usable during brief internet interruptions, but the cache is not a complete offline map.
The 2026.10 beta carries the map presentation into the zone editor under Settings > Areas, labels & zones. It also changes how automation conditions refer to triggers. Previously, users had to expose a trigger’s ID, set it and then choose that ID in a condition. The new interface allows direct trigger selection, while Home Assistant manages the IDs. Users who refer to trigger.id in templates or action data still need to maintain those references themselves.
smart lock with one-touch locking feature
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
Beta Features May Still Change
2026.10 is a beta, so the listed features may change or be removed before the stable release. The report does not specify which other Matter devices will expose the new alarm, lock or electrical controls, beyond the examples and device categories it names. Availability depends on what each device supports and reports.
The source report describes testing the leak-sensor alarm controls with IKEA KLIPPBOK and Shelly Flood, but it does not provide a wider compatibility list or test results for all devices. It also does not give a final stable-release changelog. Users should treat the beta’s feature set as provisional until Home Assistant publishes the stable version.
electricity monitoring device with frequency and power factor readings
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
Stable Release Expected Oct. 7
Home Assistant’s stable 2026.10 release is expected on Wednesday, Oct. 7, 2026. The beta report says Home Assistant OS users can opt in by opening Settings > System > Updates, selecting the three-dot menu and choosing “Join beta,” then installing the offered update. Beta testers can share feedback in the official community forum.
Users who install the beta can check whether their own Matter devices expose the new controls and report compatibility issues before the stable release. The final feature set and any changes made during testing will become clearer when Home Assistant publishes the stable update.
As an affiliate, we earn on qualifying purchases.
Key Questions
What new Matter controls are in Home Assistant 2026.10?
The beta adds separate audible and visual alarm settings for supported Matter leak sensors, a one-touch locking option for compatible Matter locks, and frequency and power-factor measurements for devices that expose them.
Which leak sensors are named as compatible examples?
The report names the IKEA KLIPPBOK and Shelly Flood as examples tested with the new alarm controls. It does not provide a complete list of supported models.
When is Home Assistant 2026.10 expected to be released?
The stable release is expected on Oct. 7, 2026. The version is currently in beta, and its features may change before then.
Can the new map work fully offline?
No. Home Assistant caches recently used map tiles, which the report says can help during brief internet interruptions, but it does not provide a complete offline map.
Do users need to update trigger IDs in existing automations?
The new editor manages IDs for trigger selections made in “Triggered by” conditions. However, users who reference trigger.id directly in templates or action data still need to maintain those references themselves.
Source: rss
Halloween Picks
halloween
As an affiliate, we earn on qualifying purchases.
