TL;DR
Get home appliances delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
A Hunker report outlines a do-it-yourself umbrella holder made from an empty plastic bottle with a cap, string and a cut opening. The design collects drips in the bottle, but users should empty it after each use and let the umbrella dry rather than leaving it stored wet.
Hunker has described a DIY umbrella holder made from an empty plastic bottle, string and basic cutting tools, offering a way to catch water dripping from a folded, wet umbrella. The bottle’s cap end serves as a reservoir, while the cut-open bottom lets the umbrella slide inside; the report says the holder can be hung in a car or near a home entrance.
The project uses a plastic bottle with a cap, such as a water or soft-drink bottle, plus string and a tool to cut the plastic. The instructions call for removing the label, turning the bottle upside down and cutting off its bottom. The umbrella is inserted through that opening, and water drains toward the bottle neck, where it can collect while the cap remains in place.
To make the holder hangable, the maker creates two holes beside the cut opening, threads a piece of string through each and knots the ends. The two strings are then tied together to form a loop. The report says YouTuber ABC Upcycling used a drill to make the holes, while a knife or scissors may also be used. The source does not provide testing or safety certification for the finished holder.
Decoration is optional. Hunker describes leaving the bottle clear or covering it with fabric, paint, decoupage or cord. Any added material should not obstruct the cap or bottle neck, which needs to open so collected water can be emptied. If paint or glue is used, the craft should dry fully before the holder is put to use.
A Simple Way to Catch Umbrella Drips
The holder addresses a familiar practical problem: a folded umbrella can drip onto car interiors and household floors after rainy-weather use. Hunker says damp conditions may contribute to mildew or floor damage, while leaving an umbrella outside can expose it to wind. A container that travels with the umbrella can catch water in places where a wet umbrella is inconvenient to set down.
The idea also repurposes a bottle that might otherwise be discarded, using common materials rather than requiring a purpose-made accessory. Its usefulness will depend on the bottle size, umbrella fit and placement. A small bottle may not accommodate a large umbrella, and the source does not report comparative tests showing how much water the design holds or how well it works across different umbrella styles.
As an affiliate, we earn on qualifying purchases.
How the Bottle Holder Works
The method relies on the bottle’s original neck and cap remaining at the lower end when the bottle is inverted. After the bottom is removed, the umbrella enters through the wider cut opening, and water runs down toward the capped neck. The string loop provides a way to suspend the holder from a car hook, entryway hook or door handle, as described in the Hunker report.
Hunker presents the project as an upcycling craft, not as a substitute for drying an umbrella. Its instructions specifically advise opening the bottle after use and pouring out the collected water. The umbrella should then be opened indoors to dry, rather than being left wet inside the holder. That guidance is important because trapped moisture can encourage mildew and may damage the umbrella or the holder over time.
““All you need is a plastic bottle with a cap, something to cut the plastic, and string.””
— Hunker report
DIY umbrella holder plastic bottle
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
Fit, Capacity and Durability Questions
The supplied report does not specify bottle dimensions, a maximum water capacity or which umbrella sizes fit best. It also does not provide durability testing, instructions for securing the holder in a moving vehicle, or evidence that the design prevents all leaks. Readers will need to check that the umbrella fits through the cut opening and that the bottle hangs securely in the intended location.
The instructions mention using a knife or scissors for the cuts and holes, but give no detailed tool-safety guidance. The source also does not identify particular paints, adhesives or coatings as suitable for every type of plastic. Those choices, as well as the holder’s performance in regular use, remain dependent on the materials and how the craft is made.
As an affiliate, we earn on qualifying purchases.
Empty It and Dry the Umbrella
After each use, the holder should be taken down or opened so the collected water can be emptied. Hunker advises opening the umbrella indoors and letting it dry before closing and putting it away. That step limits the time moisture sits inside the bottle and helps keep the umbrella from being stored damp.
Anyone making the holder can first measure the umbrella and the place where it will hang, then cut the bottle and string to suit. The bottle cap and neck should remain accessible for draining, and any paint or glue should be fully dry before use. The source provides no announced follow-up testing; its immediate practical next step is to make the holder, check the fit and empty it after use.
As an affiliate, we earn on qualifying purchases.
Key Questions
What materials does the DIY umbrella holder require?
The basic list is a plastic bottle with a cap, string and a cutting tool. Hunker says a water bottle or soft-drink bottle can be used. Decoration such as paint, fabric or cord is optional.
How does the bottle catch water?
The bottle is turned upside down and its bottom is cut off so the umbrella can slide inside. Water runs toward the capped neck and collects in the bottle until it is emptied.
Where can the holder be hung?
The report suggests hanging it from a car hook or an entryway hook, or looping it over a back-door handle. It does not provide vehicle-specific installation or safety testing.
Can a wet umbrella stay in the holder?
Not for an extended period. Hunker advises emptying the bottle after each use and opening the umbrella indoors to dry, since trapped moisture can lead to mildew.
Will every plastic bottle and umbrella work?
The source does not specify tested sizes or a capacity limit. Check that the umbrella fits through the cut opening and that the bottle can hold the drips; fit and performance may vary by bottle and umbrella.
Source: rss
Cold & flu season Picks
humidifiers
As an affiliate, we earn on qualifying purchases.
